Wooden Acoustic Fire Doors - Fire Rated Doors - Fire Resistant Doors
Ecotone is the leading Manufacturer of Wooden Acoustic Fire Doors -Fire rated door – Fire Resistant Doors in India. also having STC – 35 to 50 STC and fire rating will be 60 / 120 minutes conforming to BS: 476 part 22/IS-3614 Part 2.
Acoustic Fire doors are useful to control noise transfer and fire from Electrical Panel rooms, Lift Lobby, AHU Rooms, etc.
The wooden acoustic fire door will be with the door frame and shutter, Single / Double leaf also having STC – 35 to 50 STC and fire rating will be 60 / 120 minutes conforming to BS: 476 part 22/IS-3614 Part 2
WOODEN ACOUSTIC DOOR: -
55mm to 72mm thick sandwich-type composite sound-reducing flush door shutters. The combined assembly set of the door frame and door shutters to be as per the following details:
(a) Door frame shall be of teak/hard wood of size – 125 mm X 85 mm, including making necessary grooves in the frame for fixing of hollow bulb type EDPM gaskets on rebates to block noise leakage from a gap in between door frame and shutter.
(b) The shutters shall comprise of two non-combustible boards 12 mm thick sandwiching 30 mm thick fire-resistant insulation filler, with 4 mm thick (nominal) commercial ply on both the sides & 3 mm thick sheet rubber interlayer and hardwood lipping all-round with heat-activated Intumescent fire seal strips of size 10 x 4 mm and Neoprene rubber gaskets to block noise leakage from a gap in between door frame and shutter on all the sides.
(C) The frame of shutter shall be made from 40 mm thick teak/hardwood stiles and top & bottom rails of size 94 mm and a core made of lock rail 100 mm wide and 40 mm thick and three additional strips 50 mm wide and 25 mm thick (minimum)
(d) The core of the door shutter shall be filled with acoustic insulation material, sound-absorbing, and damping material.
(e) Face panels shall be of 12 mm thick Marine ply boards of approved make conforming to relevant IS codes / International Standards on both sides of the core of the shutter with required primer at the unexposed surface. One side of plyboard shall be fixed to the core of the shutter along with a 5 mm thick Neoprene rubber sheet on its inner face.
(f) 01 mm mica OR 04 mm thick Teak Veneer of approved make shall be bonded with 12 mm thick marine plyboard on both faces of the shutter by using high strength cross linked PVAC based adhesive.
(g) Dropdown Seal: – Excellent quality range of Internal Automatic Dropdown Seal, which is manufactured from high-grade quality raw materials. These Internal Automatic Dropdown Seal can be customized as per our precious customer’s specifications. These Internal Automatic Dropdown Seals are widely known for their durability and quality. Internal Automatic Dropdown Seal can be availed at an industrial leading price. Resists sound up to 37db, air, insects, cold smoke, light. Designed for timber (wooden) doors.
(h) Hardware- The door assembly shall be fixed to the door frame with heavy-duty stainless steel hardware i.e. Door Lock, SS Bal bearing Hinges, SS door handle ‘D’ type back to back, SS Tower bolt.